[
  {
    "id": "P02",
    "slug": "12x16-storage-workshop-shed",
    "title": "12×16 Storage + Hand-work Shed",
    "primaryUse": "workshop",
    "useLabel": "Storage + workshop",
    "description": "Keep the mower, front shelf and seasonal bin from the 10×12 study, then add a rear bench. Working at that bench requires the mower outside first.",
    "contentType": "layout_reference",
    "editorialStatus": "review",
    "version": "2026-09-14-r4-v2",
    "geometryVersion": "P02-geometry-v1",
    "reviewedAt": "2026-09-14",
    "region": "Original planning study; no site-specific engineering",
    "footprint": {
      "widthInches": 144,
      "depthInches": 192,
      "basis": "nominal",
      "note": "Nominal exterior class only. All clear dimensions below are authored example inputs, not a product specification."
    },
    "suitableFor": [
      "A storage-first shed with occasional hand-tool work.",
      "A task sequence that allows rolling the mower outside before work."
    ],
    "tradeoffs": [
      "The parked mower overlaps the authored standing reservation by 4 in.",
      "The added bench is extra inventory; the larger opening is also a changed input."
    ],
    "unassessed": [
      "Measure usable interior, actual opening and equipment attachments.",
      "Check the outdoor staging space, threshold and turning route.",
      "Confirm bench use, ventilation, lighting and electrical needs separately."
    ],
    "facts": [
      {
        "id": "usable-width",
        "label": "Usable width",
        "value": 136,
        "unit": "in",
        "basis": "planning_assumption",
        "sourceId": "editorial",
        "note": "After authored wall allowance."
      },
      {
        "id": "usable-depth",
        "label": "Usable depth",
        "value": 184,
        "unit": "in",
        "basis": "planning_assumption",
        "sourceId": "editorial",
        "note": "After authored wall allowance."
      },
      {
        "id": "door",
        "label": "Clear entry width",
        "value": 72,
        "unit": "in",
        "basis": "planning_assumption",
        "sourceId": "editorial",
        "note": "Centered; 78 in authored clear height."
      },
      {
        "id": "standing",
        "label": "Standing depth",
        "value": 30,
        "unit": "in",
        "basis": "planning_assumption",
        "sourceId": "editorial",
        "note": "Authored reservation, not ergonomic approval."
      },
      {
        "id": "overlap",
        "label": "Parked overlap depth",
        "value": 4,
        "unit": "in",
        "basis": "calculated",
        "sourceId": "editorial",
        "note": "Mower rear at 134; standing zone begins at 130."
      }
    ],
    "sources": [
      {
        "id": "editorial",
        "title": "Original assumptions and diagram manifest",
        "author": "ShedBuildPlans",
        "url": "/project-resources/2026-09-14-r4-v2/editorial-manifest.json",
        "scope": "Defines this study’s authored geometry and questions; not built-project evidence.",
        "region": "US reference; confirm local conditions",
        "checkedAt": "2026-09-14",
        "imageRights": "onsite_original",
        "pdfRedistributionRights": "onsite_original",
        "embedAllowed": false
      }
    ],
    "assets": [
      {
        "id": "hero",
        "role": "hero",
        "src": "/project-resources/2026-09-14-r4-v2/12x16-storage-workshop-shed/hero.svg",
        "preview": "/project-resources/2026-09-14-r4-v2/12x16-storage-workshop-shed/hero.webp",
        "alt": "12×16 Storage + Hand-work Shed. A storage shed with a rear hand-work bench.",
        "caption": "Original diagram. Illustrative form, not verified construction geometry.",
        "question": "What is the project?",
        "conclusion": "A storage shed with a rear hand-work bench.",
        "version": "2026-09-14-r4-v2",
        "geometryVersion": "P02-geometry-v1",
        "rights": "onsite_original",
        "sourceIds": [
          "editorial"
        ]
      },
      {
        "id": "layout",
        "role": "dimensions",
        "src": "/project-resources/2026-09-14-r4-v2/12x16-storage-workshop-shed/layout.svg",
        "preview": "/project-resources/2026-09-14-r4-v2/12x16-storage-workshop-shed/layout.webp",
        "alt": "Read the example inputs. Four inches of the standing zone meet the parked mower.",
        "caption": "Original diagram. Authored reference; inches unless marked unknown.",
        "question": "What actually fits?",
        "conclusion": "Four inches of the standing zone meet the parked mower.",
        "version": "2026-09-14-r4-v2",
        "geometryVersion": "P02-geometry-v1",
        "rights": "onsite_original",
        "sourceIds": [
          "editorial"
        ]
      },
      {
        "id": "work-sequence",
        "role": "action",
        "src": "/project-resources/2026-09-14-r4-v2/12x16-storage-workshop-shed/work-sequence.svg",
        "preview": "/project-resources/2026-09-14-r4-v2/12x16-storage-workshop-shed/work-sequence.webp",
        "alt": "Roll out, then work. Remove the mower before using the bench reservation.",
        "caption": "Original diagram. Authored reference; inches unless marked unknown.",
        "question": "Can storage and work happen together?",
        "conclusion": "Remove the mower before using the bench reservation.",
        "version": "2026-09-14-r4-v2",
        "geometryVersion": "P02-geometry-v1",
        "rights": "onsite_original",
        "sourceIds": [
          "editorial"
        ]
      },
      {
        "id": "tradeoff",
        "role": "tradeoff",
        "src": "/project-resources/2026-09-14-r4-v2/12x16-storage-workshop-shed/tradeoff.svg",
        "preview": "/project-resources/2026-09-14-r4-v2/12x16-storage-workshop-shed/tradeoff.webp",
        "alt": "What the larger shell changes. Same three stored objects, plus a bench and a wider opening.",
        "caption": "Original diagram. Authored reference; inches unless marked unknown.",
        "question": "Is this merely a scaled-up 10×12?",
        "conclusion": "Same three stored objects, plus a bench and a wider opening.",
        "version": "2026-09-14-r4-v2",
        "geometryVersion": "P02-geometry-v1",
        "rights": "onsite_original",
        "sourceIds": [
          "editorial"
        ]
      }
    ],
    "resources": [],
    "sections": [
      {
        "id": "layout",
        "title": "Read the example inputs",
        "paragraphs": [
          "Mower 54×84 in; shelf 18×72; bin 20×30; bench 60×24. Coordinates start at the front-left: mower (41,50), shelf (0,0), bin (0,154), bench (38,160).",
          "The standing reservation is (38,130), 60×30 in. These are example inputs, not measurements from a sold shed."
        ],
        "assetId": "layout"
      },
      {
        "id": "work-sequence",
        "title": "Roll out, then work",
        "paragraphs": [
          "1. Open the full entrance and move the mower to a suitable outdoor staging location. 2. Carry the hand tools to the rear bench. 3. Finish and clear the standing zone before returning the mower.",
          "The floor model checks rectangles and access. It does not assess machinery operation, exhaust, electrical work or the outdoor turn."
        ],
        "assetId": "work-sequence"
      },
      {
        "id": "tradeoff",
        "title": "What the larger shell changes",
        "paragraphs": [
          "P01 has 112×136 in usable floor and a 64 in clear opening. This P02 example has 136×184 in usable floor and a 72 in opening. The mower, shelf and bin keep their original dimensions; the bench is explicitly additional.",
          "Extra floor area does not create simultaneous bench access with the mower parked. The working sequence is the deciding trade-off."
        ],
        "assetId": "tradeoff"
      }
    ],
    "relatedPaths": [
      {
        "href": "/uses/workshop-shed/",
        "label": "Workshop uses"
      },
      {
        "href": "/uses/riding-mower-storage-shed/",
        "label": "Mower storage"
      },
      {
        "href": "/sizes/12x16-shed/",
        "label": "12×16 size"
      },
      {
        "href": "/projects/10x12-gable-storage-shed/",
        "label": "Compare the 10×12 storage study"
      }
    ],
    "accessSummary": "72 in example clear opening; move mower before bench work.",
    "resourceSummary": "Original Letter and A4 layout studies, with final-file previews. These are decision aids, not construction plans.",
    "preset": "P02"
  },
  {
    "id": "P04",
    "slug": "open-front-bike-storage-case-study",
    "title": "Open-front Bike Storage Case Study",
    "primaryUse": "bike_storage",
    "useLabel": "Bike storage",
    "description": "A documented 3x3 Custom build for children’s bikes, scooters and outdoor toys. Its open front puts direct retrieval ahead of enclosed storage.",
    "contentType": "documented_project",
    "editorialStatus": "review",
    "version": "2026-09-14-r4-v2",
    "geometryVersion": "P04-geometry-v1",
    "reviewedAt": "2026-09-14",
    "region": "3x3 Custom original build account; regional site conditions unverified",
    "footprint": {
      "widthInches": null,
      "depthInches": null,
      "basis": "source_reported",
      "note": "The source PDF lists 7 ft width, 4 ft front opening and 5 ft rear height. Opening axis and usable depth are not verified; do not infer a 7×4 ft footprint."
    },
    "suitableFor": [
      "Visible, direct access to children’s bikes and scooters.",
      "Comparing an open front with an enclosed bike shed."
    ],
    "tradeoffs": [
      "Open access also leaves stored objects exposed at the front.",
      "Adult bike capacity, locking and wind-driven rain performance are not established."
    ],
    "unassessed": [
      "Measure your equipment, roof projection, usable depth and clear approach.",
      "Confirm anchorage, weather exposure, locking needs and local requirements.",
      "Check source revisions before using the author’s material and cut lists."
    ],
    "facts": [
      {
        "id": "width",
        "label": "Source listed overall width",
        "value": 84,
        "unit": "in",
        "basis": "source_reported",
        "sourceId": "3x3",
        "note": "Source PDF p1; not clear interior."
      },
      {
        "id": "opening",
        "label": "Usable clear opening",
        "value": null,
        "unit": "in",
        "basis": "source_reported",
        "sourceId": "3x3",
        "note": "The source label does not establish both clear axes."
      },
      {
        "id": "capacity",
        "label": "Adult bicycle capacity",
        "value": null,
        "unit": "in",
        "basis": "source_reported",
        "sourceId": "3x3",
        "note": "Not established by the author’s child-bike example."
      }
    ],
    "sources": [
      {
        "id": "3x3",
        "title": "DIY Bike Shed — original build account",
        "author": "3x3 Custom",
        "url": "https://www.3x3custom.com/tutorials/2018/5/30/diy-bike-shed",
        "scope": "Documents the open-front build and links its nine-page plans. The author discloses sponsorship and affiliate links. Our diagram is an independent schematic.",
        "region": "US reference; confirm local conditions",
        "checkedAt": "2026-09-14",
        "imageRights": "not_granted",
        "pdfRedistributionRights": "not_granted",
        "embedAllowed": false
      },
      {
        "id": "editorial",
        "title": "Original assumptions and diagram manifest",
        "author": "ShedBuildPlans",
        "url": "/project-resources/2026-09-14-r4-v2/editorial-manifest.json",
        "scope": "Defines this study’s authored geometry and questions; not built-project evidence.",
        "region": "US reference; confirm local conditions",
        "checkedAt": "2026-09-14",
        "imageRights": "onsite_original",
        "pdfRedistributionRights": "onsite_original",
        "embedAllowed": false
      }
    ],
    "assets": [
      {
        "id": "hero",
        "role": "hero",
        "src": "/project-resources/2026-09-14-r4-v2/open-front-bike-storage-case-study/hero.svg",
        "preview": "/project-resources/2026-09-14-r4-v2/open-front-bike-storage-case-study/hero.webp",
        "alt": "Open-front Bike Storage Case Study. An open front, slatted enclosure and sloping roof; proportions schematic.",
        "caption": "Original diagram. Illustrative form, not verified construction geometry.",
        "question": "What did the source build?",
        "conclusion": "An open front, slatted enclosure and sloping roof; proportions schematic.",
        "version": "2026-09-14-r4-v2",
        "geometryVersion": "P04-geometry-v1",
        "rights": "onsite_original",
        "sourceIds": [
          "3x3",
          "editorial"
        ]
      },
      {
        "id": "source-definition",
        "role": "dimensions",
        "src": "/project-resources/2026-09-14-r4-v2/open-front-bike-storage-case-study/source-definition.svg",
        "preview": "/project-resources/2026-09-14-r4-v2/open-front-bike-storage-case-study/source-definition.webp",
        "alt": "Separate the dimension labels. Overall width is reported; clear floor depth and capacity remain unknown.",
        "caption": "Original diagram. Unscaled original schematic; no verified clear dimensions.",
        "question": "What does the PDF actually define?",
        "conclusion": "Overall width is reported; clear floor depth and capacity remain unknown.",
        "version": "2026-09-14-r4-v2",
        "geometryVersion": "P04-geometry-v1",
        "rights": "onsite_original",
        "sourceIds": [
          "3x3",
          "editorial"
        ]
      },
      {
        "id": "retrieval",
        "role": "action",
        "src": "/project-resources/2026-09-14-r4-v2/open-front-bike-storage-case-study/retrieval.svg",
        "preview": "/project-resources/2026-09-14-r4-v2/open-front-bike-storage-case-study/retrieval.webp",
        "alt": "Retrieve directly from the front. A direct front approach avoids a door swing but needs clear staging space.",
        "caption": "Original diagram. Unscaled action study; route width unknown.",
        "question": "What changes without doors?",
        "conclusion": "A direct front approach avoids a door swing but needs clear staging space.",
        "version": "2026-09-14-r4-v2",
        "geometryVersion": "P04-geometry-v1",
        "rights": "onsite_original",
        "sourceIds": [
          "3x3",
          "editorial"
        ]
      },
      {
        "id": "exposure",
        "role": "tradeoff",
        "src": "/project-resources/2026-09-14-r4-v2/open-front-bike-storage-case-study/exposure.svg",
        "preview": "/project-resources/2026-09-14-r4-v2/open-front-bike-storage-case-study/exposure.webp",
        "alt": "Access versus enclosure. The same face used for retrieval remains exposed.",
        "caption": "Original diagram. Exposure relationship only; no weather-performance result.",
        "question": "What does the open face give up?",
        "conclusion": "The same face used for retrieval remains exposed.",
        "version": "2026-09-14-r4-v2",
        "geometryVersion": "P04-geometry-v1",
        "rights": "onsite_original",
        "sourceIds": [
          "3x3",
          "editorial"
        ]
      }
    ],
    "resources": [
      {
        "id": "P04-3x3",
        "projectId": "P04",
        "title": "DIY Bike Shed — original build account",
        "provider": "3x3 Custom",
        "location": "external",
        "type": "guide",
        "access": "free",
        "status": "available",
        "url": "https://www.3x3custom.com/tutorials/2018/5/30/diy-bike-shed",
        "includes": [
          "Original build process and project photographs"
        ],
        "excludes": [
          "This study’s dimensions or design validation",
          "Local structural, animal-capacity or permit approval"
        ],
        "conditions": "Public original source. Opens with its provider; no third-party material is hosted here.",
        "version": "source-checked-2026-09-14",
        "lastChecked": "2026-09-14"
      },
      {
        "id": "P04-original-plans",
        "projectId": "P04",
        "title": "DIY Storage Shed — original nine-page PDF",
        "provider": "3x3 Custom",
        "location": "external",
        "type": "plans",
        "access": "free",
        "status": "available",
        "url": "https://www.3x3custom.com/s/Bike-Shed-plans.pdf",
        "includes": [
          "Nine-page PDF checked on 2026-09-14",
          "Materials list, cut list and illustrated assembly sequence"
        ],
        "excludes": [
          "Verified clear interior and adult-bike capacity",
          "This site’s construction or structural approval"
        ],
        "conditions": "Opens at the author’s provider. No signup was required when checked. Definitions of overall and opening dimensions need confirmation.",
        "version": "source-checked-2026-09-14",
        "lastChecked": "2026-09-14"
      }
    ],
    "sections": [
      {
        "id": "source-definition",
        "title": "Separate the dimension labels",
        "paragraphs": [
          "The original PDF contains materials, cuts and steps. Its first-page width is not a usable-interior measurement. Its front-opening label must not be relabeled as footprint depth.",
          "The shapes represent a retrieval arrangement, not a count of bikes that will fit your equipment."
        ],
        "assetId": "source-definition"
      },
      {
        "id": "retrieval",
        "title": "Retrieve directly from the front",
        "paragraphs": [
          "Keep an approach in front of the chosen bike or scooter. Verify your handlebars, wheelbase and ability to lift or roll over the threshold.",
          "The source’s children’s-equipment use does not establish independent retrieval of larger bikes."
        ],
        "assetId": "retrieval"
      },
      {
        "id": "exposure",
        "title": "Access versus enclosure",
        "paragraphs": [
          "Choose an open front only after considering weather exposure and security. A roof outline alone does not prove that stored items remain dry.",
          "Compare with the enclosed 7×4 bike case; keep its source-reported size and unknown capacity separate from this project."
        ],
        "assetId": "exposure"
      }
    ],
    "relatedPaths": [
      {
        "href": "/uses/bike-storage-shed/",
        "label": "Bike storage choices"
      }
    ],
    "accessSummary": "No front doors; clear dimensions unverified.",
    "resourceSummary": "Original Letter and A4 layout studies, with final-file previews. These are decision aids, not construction plans.",
    "preset": null
  },
  {
    "id": "P06",
    "slug": "greenhouse-storage-partition-layout",
    "title": "Greenhouse + Dry Storage Partition",
    "primaryUse": "greenhouse_storage",
    "useLabel": "Greenhouse + storage",
    "description": "A 12×16 nominal example with transparent growing space behind a partition and an opaque dry-storage zone at the front. Test the connecting opening before allocating more growing area.",
    "contentType": "layout_reference",
    "editorialStatus": "review",
    "version": "2026-09-14-r4-v2",
    "geometryVersion": "P06-geometry-v1",
    "reviewedAt": "2026-09-14",
    "region": "Original planning study; no site-specific engineering",
    "footprint": {
      "widthInches": 144,
      "depthInches": 192,
      "basis": "nominal",
      "note": "Nominal exterior class only. All clear dimensions below are authored example inputs, not a product specification."
    },
    "suitableFor": [
      "Garden tools and potting supplies with a distinct growing area.",
      "Checking service access before choosing how much length each zone gets."
    ],
    "tradeoffs": [
      "A partition consumes space and does not by itself control moisture.",
      "More growing length leaves less dry-storage length."
    ],
    "unassessed": [
      "Measure actual enclosure, opening and occupied bench dimensions.",
      "Review sunlight, ventilation, condensation, drainage and irrigation locally.",
      "Confirm materials and separation details; fuels and chemicals are outside this study."
    ],
    "facts": [
      {
        "id": "width",
        "label": "Usable width",
        "value": 136,
        "unit": "in",
        "basis": "planning_assumption",
        "sourceId": "editorial",
        "note": "Authored interior."
      },
      {
        "id": "depth",
        "label": "Usable depth",
        "value": 184,
        "unit": "in",
        "basis": "planning_assumption",
        "sourceId": "editorial",
        "note": "Authored interior."
      },
      {
        "id": "grow",
        "label": "Growing depth",
        "value": 84,
        "unit": "in",
        "basis": "planning_assumption",
        "sourceId": "editorial",
        "note": "Rear zone; not a yield recommendation."
      },
      {
        "id": "dry",
        "label": "Dry-storage depth",
        "value": 96,
        "unit": "in",
        "basis": "calculated",
        "sourceId": "editorial",
        "note": "184 − 84 − 4 in partition."
      },
      {
        "id": "opening",
        "label": "Partition opening",
        "value": 30,
        "unit": "in",
        "basis": "planning_assumption",
        "sourceId": "editorial",
        "note": "Equal to the authored tending aisle; verify handling clearance."
      }
    ],
    "sources": [
      {
        "id": "editorial",
        "title": "Original assumptions and diagram manifest",
        "author": "ShedBuildPlans",
        "url": "/project-resources/2026-09-14-r4-v2/editorial-manifest.json",
        "scope": "Defines this study’s authored geometry and questions; not built-project evidence.",
        "region": "US reference; confirm local conditions",
        "checkedAt": "2026-09-14",
        "imageRights": "onsite_original",
        "pdfRedistributionRights": "onsite_original",
        "embedAllowed": false
      },
      {
        "id": "uga-greenhouse",
        "title": "Hobby Greenhouses",
        "author": "UGA Cooperative Extension",
        "url": "https://fieldreport.caes.uga.edu/publications/B910/hobby-greenhouses/",
        "scope": "Supports evaluating ventilation and greenhouse environmental control; does not validate this partition or its dimensions.",
        "region": "US reference; confirm local conditions",
        "checkedAt": "2026-09-14",
        "imageRights": "not_granted",
        "pdfRedistributionRights": "not_granted",
        "embedAllowed": false
      },
      {
        "id": "uga-storage",
        "title": "Garden Sheds",
        "author": "UGA Cooperative Extension",
        "url": "https://fieldreport.caes.uga.edu/publications/C1027-7/garden-sheds/",
        "scope": "Supports accessible, dry garden-tool storage; no claim of climate separation for this example.",
        "region": "US reference; confirm local conditions",
        "checkedAt": "2026-09-14",
        "imageRights": "not_granted",
        "pdfRedistributionRights": "not_granted",
        "embedAllowed": false
      }
    ],
    "assets": [
      {
        "id": "hero",
        "role": "hero",
        "src": "/project-resources/2026-09-14-r4-v2/greenhouse-storage-partition-layout/hero.svg",
        "preview": "/project-resources/2026-09-14-r4-v2/greenhouse-storage-partition-layout/hero.webp",
        "alt": "Greenhouse + Dry Storage Partition. Transparent growing enclosure with a separate opaque dry-storage zone.",
        "caption": "Original diagram. Illustrative form, not verified construction geometry.",
        "question": "How are growing and storage different?",
        "conclusion": "Transparent growing enclosure with a separate opaque dry-storage zone.",
        "version": "2026-09-14-r4-v2",
        "geometryVersion": "P06-geometry-v1",
        "rights": "onsite_original",
        "sourceIds": [
          "editorial",
          "uga-greenhouse",
          "uga-storage"
        ]
      },
      {
        "id": "allocations",
        "role": "dimensions",
        "src": "/project-resources/2026-09-14-r4-v2/greenhouse-storage-partition-layout/allocations.svg",
        "preview": "/project-resources/2026-09-14-r4-v2/greenhouse-storage-partition-layout/allocations.webp",
        "alt": "Two zones and a partition. 84 in growing + 4 in partition + 96 in dry storage = 184 in.",
        "caption": "Original diagram. Authored reference; inches unless marked unknown.",
        "question": "Where did the space go?",
        "conclusion": "84 in growing + 4 in partition + 96 in dry storage = 184 in.",
        "version": "2026-09-14-r4-v2",
        "geometryVersion": "P06-geometry-v1",
        "rights": "onsite_original",
        "sourceIds": [
          "editorial",
          "uga-greenhouse",
          "uga-storage"
        ]
      },
      {
        "id": "service-route",
        "role": "action",
        "src": "/project-resources/2026-09-14-r4-v2/greenhouse-storage-partition-layout/service-route.svg",
        "preview": "/project-resources/2026-09-14-r4-v2/greenhouse-storage-partition-layout/service-route.webp",
        "alt": "Carry, tend, return. The 30 in service strip connects the entrance and rear growing zone.",
        "caption": "Original diagram. Authored reference; inches unless marked unknown.",
        "question": "Can supplies reach the growing bench?",
        "conclusion": "The 30 in service strip connects the entrance and rear growing zone.",
        "version": "2026-09-14-r4-v2",
        "geometryVersion": "P06-geometry-v1",
        "rights": "onsite_original",
        "sourceIds": [
          "editorial",
          "uga-greenhouse",
          "uga-storage"
        ]
      },
      {
        "id": "opening-failure",
        "role": "tradeoff",
        "src": "/project-resources/2026-09-14-r4-v2/greenhouse-storage-partition-layout/opening-failure.svg",
        "preview": "/project-resources/2026-09-14-r4-v2/greenhouse-storage-partition-layout/opening-failure.webp",
        "alt": "A narrow partition breaks the route. A 20 in opening cannot contain the authored 30 in service strip.",
        "caption": "Original diagram. Authored reference; inches unless marked unknown.",
        "question": "What fails if the opening shrinks?",
        "conclusion": "A 20 in opening cannot contain the authored 30 in service strip.",
        "version": "2026-09-14-r4-v2",
        "geometryVersion": "P06-geometry-v1",
        "rights": "onsite_original",
        "sourceIds": [
          "editorial",
          "uga-greenhouse",
          "uga-storage"
        ]
      }
    ],
    "resources": [
      {
        "id": "P06-uga-greenhouse",
        "projectId": "P06",
        "title": "Hobby Greenhouses",
        "provider": "UGA Cooperative Extension",
        "location": "external",
        "type": "guide",
        "access": "free",
        "status": "available",
        "url": "https://fieldreport.caes.uga.edu/publications/B910/hobby-greenhouses/",
        "includes": [
          "Original scoped guidance; dimensions here remain authored"
        ],
        "excludes": [
          "This study’s dimensions or design validation",
          "Local structural, animal-capacity or permit approval"
        ],
        "conditions": "Public original source. Opens with its provider; no third-party material is hosted here.",
        "version": "source-checked-2026-09-14",
        "lastChecked": "2026-09-14"
      },
      {
        "id": "P06-uga-storage",
        "projectId": "P06",
        "title": "Garden Sheds",
        "provider": "UGA Cooperative Extension",
        "location": "external",
        "type": "guide",
        "access": "free",
        "status": "available",
        "url": "https://fieldreport.caes.uga.edu/publications/C1027-7/garden-sheds/",
        "includes": [
          "Original scoped guidance; dimensions here remain authored"
        ],
        "excludes": [
          "This study’s dimensions or design validation",
          "Local structural, animal-capacity or permit approval"
        ],
        "conditions": "Public original source. Opens with its provider; no third-party material is hosted here.",
        "version": "source-checked-2026-09-14",
        "lastChecked": "2026-09-14"
      }
    ],
    "sections": [
      {
        "id": "allocations",
        "title": "Two zones and a partition",
        "paragraphs": [
          "Growing bench: 24×72 in at (0,100). Front shelf: 18×48 at (0,0); trays: 24×36 at (18,0); soil: 18×24 at (18,36). Potting surface: 24×36 at (83,0); tools: 18×36 at (107,0).",
          "The partition occupies y=96–100 in; its 30 in opening runs x=53–83. The clear front entry is 72 in, centered."
        ],
        "assetId": "allocations"
      },
      {
        "id": "service-route",
        "title": "Carry, tend, return",
        "paragraphs": [
          "Follow the clear central strip to reach the growing bench, then return tools to the front storage zone. Verify carrying width, reach and the actual door operation.",
          "This diagram records access and allocation. It does not establish that the front zone stays dry or that plants receive adequate light and ventilation."
        ],
        "assetId": "service-route"
      },
      {
        "id": "opening-failure",
        "title": "A narrow partition breaks the route",
        "paragraphs": [
          "Counterexample: retain every zone and item but reduce the partition opening from 30 to 20 in. The remaining opening fails the selected 30 in route width.",
          "Reducing a route allowance to make a drawing pass does not establish workable carrying clearance. Measure the task first."
        ],
        "assetId": "opening-failure"
      }
    ],
    "relatedPaths": [
      {
        "href": "/uses/greenhouse-shed-combo/",
        "label": "Greenhouse combinations"
      },
      {
        "href": "/sizes/12x16-shed/",
        "label": "12×16 size"
      }
    ],
    "accessSummary": "72 in front entry connects to a 30 in partition opening.",
    "resourceSummary": "Original Letter and A4 layout studies, with final-file previews. These are decision aids, not construction plans.",
    "preset": "P06"
  }
]