[
  {
    "id": "P12",
    "slug": "8x10-pool-gear-storage-layout",
    "title": "8×10 Pool Gear Storage Shed",
    "primaryUse": "pool_storage",
    "useLabel": "Pool gear storage",
    "description": "A front return spot for damp pool gear, a rear towel shelf and a small bench. Keep the center open so a bulky float basket does not turn a quick towel pickup into a reshuffle.",
    "contentType": "layout_reference",
    "editorialStatus": "review",
    "version": "2026-10-08-outdoor-v1",
    "geometryVersion": "P12-geometry-v1",
    "reviewedAt": "2026-10-08",
    "region": "Original planning study; no site-specific engineering",
    "footprint": {
      "widthInches": 96,
      "depthInches": 120,
      "basis": "nominal",
      "note": "Nominal exterior class only. All clear dimensions below are authored example inputs, not a product specification."
    },
    "suitableFor": [
      "A gear-only poolside store for towels, portable accessories and a compact bench.",
      "One person putting damp belongings near the entrance before collecting dry supplies."
    ],
    "tradeoffs": [
      "A separate return spot organizes the task; it does not contain water or prove that towels stay dry.",
      "An oversized float basket can obstruct the central approach even when it fits inside the walls."
    ],
    "unassessed": [
      "Measure real wet gear, towel storage, bench use and finished door operation.",
      "Confirm drainage, floor surface, ventilation and cleaning requirements for the actual building.",
      "Pool chemicals, pumps, electrical equipment, plumbing and changing-room provision are not part of this reference.",
      "Check local placement, pool barriers, foundations and structural requirements separately."
    ],
    "facts": [
      {
        "id": "width",
        "label": "Usable width",
        "value": 88,
        "unit": "in",
        "basis": "planning_assumption",
        "sourceId": "editorial",
        "note": "Independent authored input, not inferred from a wall assembly."
      },
      {
        "id": "depth",
        "label": "Usable depth",
        "value": 112,
        "unit": "in",
        "basis": "planning_assumption",
        "sourceId": "editorial",
        "note": "Independent authored input; verify actual finished dimensions."
      },
      {
        "id": "entry",
        "label": "Selected clear front",
        "value": 36,
        "unit": "in",
        "basis": "planning_assumption",
        "sourceId": "editorial",
        "note": "Authored reference, not a minimum requirement."
      },
      {
        "id": "approach",
        "label": "Selected central approach",
        "value": 36,
        "unit": "in",
        "basis": "planning_assumption",
        "sourceId": "editorial",
        "note": "Check actual carrying and movement needs."
      },
      {
        "id": "return-width",
        "label": "Return allocation width",
        "value": 24,
        "unit": "in",
        "basis": "planning_assumption",
        "sourceId": "editorial",
        "note": "Not a specified drainage or containment product."
      }
    ],
    "sources": [
      {
        "id": "editorial",
        "title": "Original assumptions and diagram manifest",
        "author": "ShedBuildPlans",
        "url": "/project-resources/2026-10-08-outdoor-v1/editorial-manifest.json",
        "scope": "Defines this study’s authored geometry and questions; not built-project evidence.",
        "region": "US reference; confirm local conditions",
        "checkedAt": "2026-10-08",
        "imageRights": "onsite_original",
        "pdfRedistributionRights": "onsite_original",
        "embedAllowed": false
      }
    ],
    "assets": [
      {
        "id": "hero",
        "role": "hero",
        "src": "/project-resources/2026-10-08-outdoor-v1/8x10-pool-gear-storage-layout/hero.svg",
        "preview": "/project-resources/2026-10-08-outdoor-v1/8x10-pool-gear-storage-layout/hero.webp",
        "alt": "8×10 Pool Gear Storage Shed. A front return spot for damp pool gear, a rear towel shelf and a small bench. Keep the center open so a bulky float basket does not turn a quick towel pickup into a reshuffle.",
        "caption": "Original diagram. Illustrative form, not verified construction geometry.",
        "question": "Which tasks shape this reference?",
        "conclusion": "A front return spot for damp pool gear, a rear towel shelf and a small bench. Keep the center open so a bulky float basket does not turn a quick towel pickup into a reshuffle.",
        "version": "2026-10-08-outdoor-v1",
        "geometryVersion": "P12-geometry-v1",
        "rights": "onsite_original",
        "sourceIds": [
          "editorial"
        ]
      },
      {
        "id": "layout",
        "role": "dimensions",
        "src": "/project-resources/2026-10-08-outdoor-v1/8x10-pool-gear-storage-layout/layout.svg",
        "preview": "/project-resources/2026-10-08-outdoor-v1/8x10-pool-gear-storage-layout/layout.webp",
        "alt": "Read the actual allocations. Authored rectangles; origin is the front-left corner.",
        "caption": "Original diagram. Authored reference; inches unless marked unknown.",
        "question": "What do the example dimensions mean?",
        "conclusion": "Authored rectangles; origin is the front-left corner.",
        "version": "2026-10-08-outdoor-v1",
        "geometryVersion": "P12-geometry-v1",
        "rights": "onsite_original",
        "sourceIds": [
          "editorial"
        ]
      },
      {
        "id": "action",
        "role": "action",
        "src": "/project-resources/2026-10-08-outdoor-v1/8x10-pool-gear-storage-layout/action.svg",
        "preview": "/project-resources/2026-10-08-outdoor-v1/8x10-pool-gear-storage-layout/action.webp",
        "alt": "Use the space one step at a time. Return damp portable gear at the front-right spot, then keep the central approach available when reaching the rear supplies. Move loose items out of the way before using the bench.",
        "caption": "Original diagram. Authored reference; inches unless marked unknown.",
        "question": "What moves and what stays?",
        "conclusion": "Return damp portable gear at the front-right spot, then keep the central approach available when reaching the rear supplies. Move loose items out of the way before using the bench.",
        "version": "2026-10-08-outdoor-v1",
        "geometryVersion": "P12-geometry-v1",
        "rights": "onsite_original",
        "sourceIds": [
          "editorial"
        ]
      },
      {
        "id": "tradeoff",
        "role": "tradeoff",
        "src": "/project-resources/2026-10-08-outdoor-v1/8x10-pool-gear-storage-layout/tradeoff.svg",
        "preview": "/project-resources/2026-10-08-outdoor-v1/8x10-pool-gear-storage-layout/tradeoff.webp",
        "alt": "A small addition changes access. The added basket blocks the approach.",
        "caption": "Original diagram. Authored reference; inches unless marked unknown.",
        "question": "What fails with the original task unchanged?",
        "conclusion": "The added basket blocks the approach.",
        "version": "2026-10-08-outdoor-v1",
        "geometryVersion": "P12-geometry-v1",
        "rights": "onsite_original",
        "sourceIds": [
          "editorial"
        ]
      }
    ],
    "resources": [],
    "sections": [
      {
        "id": "layout",
        "title": "Read the actual allocations",
        "paragraphs": [
          "The 88×112 in usable interior is independent of the 8×10 nominal category. Towel shelf: 16×48 at (0,64); bench: 44×18 at (22,94); gear rack: 18×40 at (70,40); front return spot: 24×28 at (64,0).",
          "The selected clear entry is 36 in at x=26–62. A 36×64 in central approach meets a 44×30 in bench approach. The return spot is a planning allocation, not a specified tray, drain or waterproof assembly."
        ],
        "assetId": "layout"
      },
      {
        "id": "action",
        "title": "Use the space one step at a time",
        "paragraphs": [
          "Return damp portable gear at the front-right spot, then keep the central approach available when reaching the rear supplies. Move loose items out of the way before using the bench.",
          "Follow the actual item maker’s care instructions before storage. The diagram traces a selected approach; it does not simulate water, people passing, door swing or outdoor arrival."
        ],
        "assetId": "action"
      },
      {
        "id": "tradeoff",
        "title": "A small addition changes access",
        "paragraphs": [
          "Add only a 20×40 in float basket at (48,20). It overlaps the central approach by 14×40 in, or 560 square inches. The shell, doorway and original storage locations stay unchanged.",
          "Measure oversized inflatables in their chosen storage state. A smaller container or a different arrangement needs a fresh check; describing the added basket as temporary does not keep the route open."
        ],
        "assetId": "tradeoff"
      }
    ],
    "relatedPaths": [
      {
        "href": "/uses/pool-storage-shed/",
        "label": "Pool storage ideas"
      },
      {
        "href": "/guides/pool-shed-storage-layout/",
        "label": "Organize wet returns and dry supplies"
      },
      {
        "href": "/guides/shed-ventilation-moisture/",
        "label": "Moisture questions"
      },
      {
        "href": "/sizes/8x10-shed/",
        "label": "8×10 references"
      }
    ],
    "accessSummary": "36 in selected entry with a clear central approach.",
    "resourceSummary": "Original Letter and A4 layout studies, with final-file previews. These are decision aids, not construction plans.",
    "preset": null
  },
  {
    "id": "P13",
    "slug": "6x4-open-front-bin-shelter",
    "title": "6×4 Open-front Double-bin Shelter",
    "primaryUse": "trash_storage",
    "useLabel": "Trash + recycling",
    "description": "A compact, open-front shelter for two illustrative wheeled bins. Compare independent straight roll-out with a divided entrance, and keep lid-open height as a separate unanswered measurement.",
    "contentType": "layout_reference",
    "editorialStatus": "review",
    "version": "2026-10-08-outdoor-v1",
    "geometryVersion": "P13-geometry-v1",
    "reviewedAt": "2026-10-08",
    "region": "Original planning study; no site-specific engineering",
    "footprint": {
      "widthInches": 72,
      "depthInches": 48,
      "basis": "nominal",
      "note": "Nominal exterior class only. All clear dimensions below are authored example inputs, not a product specification."
    },
    "suitableFor": [
      "Two bins whose measured dimensions can replace the two 24×28 in illustrative footprints.",
      "A direct forward retrieval arrangement with one bin remaining parked."
    ],
    "tradeoffs": [
      "The open front removes front-door operation but does not provide a concealed or secured front face.",
      "A floor fit does not establish lid-open clearance, tipping space or usable outdoor access."
    ],
    "unassessed": [
      "Measure the actual cart body, handles, wheels, closed height and full lid motion.",
      "Measure roof underside, beams and other obstructions; no vertical dimension is supplied in this study.",
      "Check the full outdoor wheel route, thresholds, slope, turning and standing space.",
      "Confirm local collection rules, siting, animal access, cleaning and weather exposure; no containment or pest-proofing claim."
    ],
    "facts": [
      {
        "id": "width",
        "label": "Usable width",
        "value": 68,
        "unit": "in",
        "basis": "planning_assumption",
        "sourceId": "editorial",
        "note": "Independent authored input, not inferred from a wall assembly."
      },
      {
        "id": "depth",
        "label": "Usable depth",
        "value": 44,
        "unit": "in",
        "basis": "planning_assumption",
        "sourceId": "editorial",
        "note": "Independent authored input; verify actual finished dimensions."
      },
      {
        "id": "entry",
        "label": "Selected clear front",
        "value": 60,
        "unit": "in",
        "basis": "planning_assumption",
        "sourceId": "editorial",
        "note": "Authored reference, not a minimum requirement."
      },
      {
        "id": "cart-width",
        "label": "Illustrative cart width",
        "value": 24,
        "unit": "in",
        "basis": "planning_assumption",
        "sourceId": "editorial",
        "note": "Includes only the selected footprint; no model or gallon rating."
      },
      {
        "id": "cart-depth",
        "label": "Illustrative cart depth",
        "value": 28,
        "unit": "in",
        "basis": "planning_assumption",
        "sourceId": "editorial",
        "note": "Replace with actual handles, wheels and body dimensions."
      },
      {
        "id": "lid-height",
        "label": "Available lid-open clearance",
        "value": null,
        "unit": "in",
        "basis": "planning_assumption",
        "sourceId": "editorial",
        "note": "Roof underside and full lid motion have not been supplied."
      }
    ],
    "sources": [
      {
        "id": "editorial",
        "title": "Original assumptions and diagram manifest",
        "author": "ShedBuildPlans",
        "url": "/project-resources/2026-10-08-outdoor-v1/editorial-manifest.json",
        "scope": "Defines this study’s authored geometry and questions; not built-project evidence.",
        "region": "US reference; confirm local conditions",
        "checkedAt": "2026-10-08",
        "imageRights": "onsite_original",
        "pdfRedistributionRights": "onsite_original",
        "embedAllowed": false
      }
    ],
    "assets": [
      {
        "id": "hero",
        "role": "hero",
        "src": "/project-resources/2026-10-08-outdoor-v1/6x4-open-front-bin-shelter/hero.svg",
        "preview": "/project-resources/2026-10-08-outdoor-v1/6x4-open-front-bin-shelter/hero.webp",
        "alt": "6×4 Open-front Double-bin Shelter. A compact, open-front shelter for two illustrative wheeled bins. Compare independent straight roll-out with a divided entrance, and keep lid-open height as a separate unanswered measurement.",
        "caption": "Original diagram. Illustrative form, not verified construction geometry.",
        "question": "Which tasks shape this reference?",
        "conclusion": "A compact, open-front shelter for two illustrative wheeled bins. Compare independent straight roll-out with a divided entrance, and keep lid-open height as a separate unanswered measurement.",
        "version": "2026-10-08-outdoor-v1",
        "geometryVersion": "P13-geometry-v1",
        "rights": "onsite_original",
        "sourceIds": [
          "editorial"
        ]
      },
      {
        "id": "layout",
        "role": "dimensions",
        "src": "/project-resources/2026-10-08-outdoor-v1/6x4-open-front-bin-shelter/layout.svg",
        "preview": "/project-resources/2026-10-08-outdoor-v1/6x4-open-front-bin-shelter/layout.webp",
        "alt": "Read the actual allocations. Authored rectangles; origin is the front-left corner.",
        "caption": "Original diagram. Authored reference; inches unless marked unknown.",
        "question": "What do the example dimensions mean?",
        "conclusion": "Authored rectangles; origin is the front-left corner.",
        "version": "2026-10-08-outdoor-v1",
        "geometryVersion": "P13-geometry-v1",
        "rights": "onsite_original",
        "sourceIds": [
          "editorial"
        ]
      },
      {
        "id": "action",
        "role": "action",
        "src": "/project-resources/2026-10-08-outdoor-v1/6x4-open-front-bin-shelter/action.svg",
        "preview": "/project-resources/2026-10-08-outdoor-v1/6x4-open-front-bin-shelter/action.webp",
        "alt": "Use the space one step at a time. The solid bin remains parked. The outlined bin moves straight forward without rotating while the other bin stays in place. Repeat the same check for the other side; both authored strips stay clear of the neighboring parked bin.",
        "caption": "Original diagram. Authored reference; inches unless marked unknown.",
        "question": "What moves and what stays?",
        "conclusion": "The solid bin remains parked. The outlined bin moves straight forward without rotating while the other bin stays in place. Repeat the same check for the other side; both authored strips stay clear of the neighboring parked bin.",
        "version": "2026-10-08-outdoor-v1",
        "geometryVersion": "P13-geometry-v1",
        "rights": "onsite_original",
        "sourceIds": [
          "editorial"
        ]
      },
      {
        "id": "tradeoff",
        "role": "tradeoff",
        "src": "/project-resources/2026-10-08-outdoor-v1/6x4-open-front-bin-shelter/tradeoff.svg",
        "preview": "/project-resources/2026-10-08-outdoor-v1/6x4-open-front-bin-shelter/tradeoff.webp",
        "alt": "A small addition changes access. A center post reduces both openings below the selected route width.",
        "caption": "Original diagram. Authored reference; inches unless marked unknown.",
        "question": "What fails with the original task unchanged?",
        "conclusion": "A center post reduces both openings below the selected route width.",
        "version": "2026-10-08-outdoor-v1",
        "geometryVersion": "P13-geometry-v1",
        "rights": "onsite_original",
        "sourceIds": [
          "editorial"
        ]
      }
    ],
    "resources": [],
    "sections": [
      {
        "id": "layout",
        "title": "Read the actual allocations",
        "paragraphs": [
          "The nominal category is 6×4 ft, with an independently authored 68×44 in clear floor. Two bins are each 24×28 in, located at (6,8) and (38,8). No commercial cart model or gallon capacity is implied.",
          "Each selected straight retrieval strip is 28 in wide: 24 in body plus 2 in on each side. The 60 in open front extends from x=4 to x=64. The 32 in exterior strip shown is an illustration of the next part of the route, not a sufficient maneuvering recommendation."
        ],
        "assetId": "layout"
      },
      {
        "id": "action",
        "title": "Use the space one step at a time",
        "paragraphs": [
          "The solid bin remains parked. The outlined bin moves straight forward without rotating while the other bin stays in place. Repeat the same check for the other side; both authored strips stay clear of the neighboring parked bin.",
          "Handles, wheel tilt, the person moving the bin and the rest of the outdoor route require real measurements. The drawing does not claim those checks pass. Check lid operation separately; a fixed roof cannot be approved from this plan view."
        ],
        "assetId": "action"
      },
      {
        "id": "tradeoff",
        "title": "A small addition changes access",
        "paragraphs": [
          "Add a 6 in center post at x=31–37 across the front. The former 60 in opening becomes two 27 in openings. Each is 1 in narrower than its selected 28 in retrieval strip, even though the same two parked bins still fit on the floor.",
          "This post is a geometric counterexample, not a framing recommendation. The baseline front and roof also require independent structural design. A wider shelter, different cart or different opening changes the inputs and must be checked again."
        ],
        "assetId": "tradeoff"
      }
    ],
    "relatedPaths": [
      {
        "href": "/uses/utility-storage-shed/",
        "label": "Utility storage ideas"
      },
      {
        "href": "/uses/trash-bin-storage/",
        "label": "Bin storage planning"
      },
      {
        "href": "/guides/trash-bin-shed-sizing/",
        "label": "Measure bins in every state"
      },
      {
        "href": "/guides/shed-door-size-access/",
        "label": "Check the full opening and route"
      }
    ],
    "accessSummary": "60 in open front; two 28 in selected straight retrieval strips. Lid clearance unknown.",
    "resourceSummary": "Original Letter and A4 layout studies, with final-file previews. These are decision aids, not construction plans.",
    "preset": null
  }
]