Can every bin open and roll out while the other bins remain parked?
Trash bin storage planning starts with the task you need to complete. Compare the disclosed examples below, then replace their assumptions with your measurements and keep your decision in one supplier brief.
Reference answer: 2 individually measured bins are tested parked, with lids open, and during independent straight pull-out; the first bin is 26 × 32 in. The smallest passing footprint in this three-candidate example is 8×10. This answers the disclosed example, not an unmeasured personal project.
Authored planning examples, not measured customer projects or product specifications. Dimensions are inches. No construction or safety approval.
Measure the conditions that change the answer.
Every bin
How to measure: Measure each bin including handles and wheels, both closed height and the highest point with its lid fully open.
What it changes: A parked fit can still fail the lid check. Bins are never averaged into one representative size.
Independent pull-out
How to measure: Measure the clear distance ahead of each bin and the gap between bins; leave all other bins parked during the check.
What it changes: A wide enough enclosure can still block one bin's straight extraction.
Real door operation
How to measure: Record sliding, outward or inward operation. For inward doors enter the maximum inward projection; verify the space outside separately.
What it changes: The conservative inward strip can conflict with retrieval. A sliding label does not verify tracks, latches or outside collection access.
Two ways to frame the decision.
Reference 1 · editable assumptions
Two-bin station
What you gain
Two separately measured bins can each be checked for lid height and straight extraction.
What you give up
Opening alignment and leaf movement still control access even if the bins park inside.
When to choose it
Use this direction for a two-bin collection setup, replacing both bin measurements.
Dark: equipment or storage. Pale areas: activities or zones. Dimensions in inches; scale changes with the view.
1. Bin 1: 26 × 32 in
2. Bin 2: 26 × 32 in
The stated geometry fits this arrangement.
Bin 1: closed height 44 in; lid-open height 66 in; usable height 78 in.
Every input, finding and limitation
bins / 0 / width: 26
bins / 0 / depth: 32
bins / 0 / height: 44
bins / 0 / lid Height: 66
bins / 1 / width: 26
bins / 1 / depth: 32
bins / 1 / height: 44
bins / 1 / lid Height: 66
rollout: 36
gap: 8
door Style: sliding
inward Projection: Unknown
recycling: false
Bin 1: closed height 44 in; lid-open height 66 in; usable height 78 in.
Bin 2: closed height 44 in; lid-open height 66 in; usable height 78 in.
Sliding/outward door operation and space outside the front boundary need an on-site check.
Reference 2 · editable assumptions
Three-bin recycling station
What you gain
A third independently measured recycling bin is included in every other bin's extraction check.
What you give up
Extra width and gaps may push the outer bin outside a smaller candidate or opening.
When to choose it
Start here if three bins must remain in place while any one is removed.
Dark: equipment or storage. Pale areas: activities or zones. Dimensions in inches; scale changes with the view.
1. Bin 1: 26 × 32 in
2. Bin 2: 26 × 32 in
3. Bin 3: 26 × 32 in
The stated geometry fits this arrangement.
Bin 1: closed height 44 in; lid-open height 66 in; usable height 84 in.
Every input, finding and limitation
bins / 0 / width: 26
bins / 0 / depth: 32
bins / 0 / height: 44
bins / 0 / lid Height: 66
bins / 1 / width: 26
bins / 1 / depth: 32
bins / 1 / height: 44
bins / 1 / lid Height: 66
bins / 2 / width: 26
bins / 2 / depth: 32
bins / 2 / height: 44
bins / 2 / lid Height: 66
rollout: 36
gap: 8
door Style: sliding
inward Projection: Unknown
recycling: true
Bin 1: closed height 44 in; lid-open height 66 in; usable height 84 in.
Bin 2: closed height 44 in; lid-open height 66 in; usable height 84 in.
Bin 3: closed height 44 in; lid-open height 66 in; usable height 84 in.
Sliding/outward door operation and space outside the front boundary need an on-site check.
Same task, three candidate footprints.
Reference 1 stays fixed. These are authored clear dimensions, not guaranteed interiors of products bearing the same nominal size. Each diagram uses the same scale; failed objects remain full size.
At least one shown arrangement passes the modeled geometry; read the remaining limits before making a choice.
8×10
Dark: equipment or storage. Pale areas: activities or zones. Dimensions in inches; scale changes with the view.
1. Bin 1: 26 × 32 in
2. Bin 2: 26 × 32 in
The stated geometry fits this arrangement.
Bin 1: closed height 44 in; lid-open height 66 in; usable height 78 in.
10×12
Dark: equipment or storage. Pale areas: activities or zones. Dimensions in inches; scale changes with the view.
1. Bin 1: 26 × 32 in
2. Bin 2: 26 × 32 in
The stated geometry fits this arrangement.
Bin 1: closed height 44 in; lid-open height 66 in; usable height 84 in.
12×16
Dark: equipment or storage. Pale areas: activities or zones. Dimensions in inches; scale changes with the view.
1. Bin 1: 26 × 32 in
2. Bin 2: 26 × 32 in
The stated geometry fits this arrangement.
Bin 1: closed height 44 in; lid-open height 66 in; usable height 84 in.
Test the task in use.
Bin 1 lid-open height
Bin 1 lid-open height. Lid open: 66 in; Usable height: 78 in. Entered heights fit this comparison. No opening motion or structural check is inferred.
Pull out Bin 1; other bins stay parked
Dark: equipment or storage. Pale areas: activities or zones. Dimensions in inches; scale changes with the view.
1. Bin 1: 26 × 32 in
2. Bin 2: 26 × 32 in
3. Bin 1 independent straight pull-out: 30 × 112 in
Bin 2 lid-open height
Bin 2 lid-open height. Lid open: 66 in; Usable height: 78 in. Entered heights fit this comparison. No opening motion or structural check is inferred.
Pull out Bin 2; other bins stay parked
Dark: equipment or storage. Pale areas: activities or zones. Dimensions in inches; scale changes with the view.
1. Bin 1: 26 × 32 in
2. Bin 2: 26 × 32 in
3. Bin 2 independent straight pull-out: 30 × 112 in
Controlled failure
What changes the answer?
Increase only the first bin's lid-open height to 120 inches. The parking picture stays unchanged, which is why height needs a separate check.
Bin 1: the lid-open height exceeds usable height.
Bin 1 lid-open height. Lid open: 120 in; Usable height: 78 in. Entered height exceeds the limit. No opening motion or structural check is inferred.
Sources and the questions to take further.
Layout conclusions come from the disclosed rectangular geometry and entered clearances. A source supports only the specific guidance stated here. Site, structure, ventilation, actual door operation and local requirements need separate review.
Version 2026-09-08-decisions. These files reproduce the public examples, including failed arrangements. Your private measurements are only included when you generate your own brief.
